Minimum Required Firmware Version : 07.03.06. Non-RAID HDD Disk Cache Policy : Not Applicable On the PERC controllers, the controller firmware also uses the rebuild rate. Spin Down Configured Drives : Not ApplicableĪutomatic Disk Power Saving (Idle C) : Not Applicable On a 2Tb SATA setup youre much better of using an H700 with 1Gb NV cache. Minimum Required Storport Driver Version : Not ApplicableĪbort Check Consistency on Error : DisabledĪllow Revertible Hot Spare and Replace Member : EnabledĪuto Replace Member on Predictive Failure : Disabled Minimum Required Driver Version : Not Applicable Minimum Required Firmware Version : 12.10.7-0001 Here's an example: # omreport storage controller Perhaps there's something similar for Windows in PowerShell. If you want to see the info through the command-line on a linux server, the omreport command(/opt/dell/srvadmin/bin/omreport) is the solution I've found. In other words, the Dell servers we have, their BIOS do not recognize the H700. We would like to update the firmware in a Perc H700 to the latest version, but do not have a Dell Server that is up to this task. If you download and set up OMSA, you can see the firmware versions through the webpage at You can navigate using the drop-down menus on the right to see the Chassis and Storage Firmware Versions. Need to flash Perc H700 to latest firmware, but do not have a Dell Server.
0 kommentar(er)
